36 lines
2.5 KiB
Markdown
36 lines
2.5 KiB
Markdown
# Tasks & work activities — rolling stock inspector
|
|
|
|
Source: O*NET 30.3, occupation 53-4011.00 (Locomotive Engineers).
|
|
|
|
## Task statements
|
|
|
|
- **[Core]** Monitor gauges or meters that measure speed, amperage, battery charge, or air pressure in brake lines or in main reservoirs.
|
|
- **[Core]** Observe tracks to detect obstructions.
|
|
- **[Core]** Interpret train orders, signals, or railroad rules and regulations that govern the operation of locomotives.
|
|
- **[Core]** Receive starting signals from conductors and use controls such as throttles or air brakes to drive electric, diesel-electric, steam, or gas turbine-electric locomotives.
|
|
- **[Core]** Confer with conductors or traffic control center personnel via radiophones to issue or receive information concerning stops, delays, or oncoming trains.
|
|
- **[Core]** Operate locomotives to transport freight or passengers between stations or to assemble or disassemble trains within rail yards.
|
|
- **[Core]** Respond to emergency conditions or breakdowns, following applicable safety procedures and rules.
|
|
- **[Core]** Check to ensure that brake examination tests are conducted at shunting stations.
|
|
- **[Core]** Call out train signals to assistants to verify meanings.
|
|
- **[Core]** Inspect locomotives to verify adequate fuel, sand, water, or other supplies before each run or to check for mechanical problems.
|
|
- **[Core]** Prepare reports regarding any problems encountered, such as accidents, signaling problems, unscheduled stops, or delays.
|
|
- **[Core]** Check to ensure that documentation, such as procedure manuals or logbooks, are in the driver's cab and available for staff use.
|
|
- **[Core]** Inspect locomotives after runs to detect damaged or defective equipment.
|
|
- **[Supplemental]** Monitor train loading procedures to ensure that freight or rolling stock are loaded or unloaded without damage.
|
|
|
|
## Detailed work activities
|
|
|
|
- Communicate with others to coordinate vehicle movement.
|
|
- Inspect locomotives or other railroad equipment.
|
|
- Monitor availability of equipment or supplies.
|
|
- Monitor equipment gauges or displays to ensure proper operation.
|
|
- Monitor loading processes to ensure they are performed properly.
|
|
- Monitor operational quality or safety.
|
|
- Monitor surroundings to detect potential hazards.
|
|
- Operate locomotives or other rail vehicles.
|
|
- Prepare accident or incident reports.
|
|
- Receive information or instructions for performing work assignments.
|
|
- Respond to transportation emergencies.
|
|
- Signal others to coordinate vehicle movement.
|